REQUEST A QUOTE
Cadillac® CDIS BTU Energy Meter
The choice for accurate energy measurement
The Cadillac® CDIS Remote display, also known as a BTU Energy meter, is designed to provide a local, wall or panel mounted display, for the Cadillac® CV-P, CV-HS, CV-U Vortex MASS flow meters in a saturated steam or fixed pressure gas flow application. The BTU meter display shares the same electronics platform and configuration architecture as the HEATX Energy / BTU Meter, providing the end user the same look and feel for either device. This BTU meter display is a rate and totalizing device, which is capable of calculating and displaying Volume, MASS, and Energy. Combined with Cadillac’s superior flow meter technologies the CDIS provides the most accurate, repeatable, and maintenance free energy system available in the industry.
The CDIS BTU Energy meter remote display with receive the compensated or MASS Pulse output from one the Cadillac® CV Vortex style meters, and will display, and retransmit (if desired) the Energy, consumed.
The New Industry Standard
Combined with Cadillac®’s superior flow meter technologies the CDIS BTU Energy Meter has quickly become acknowledged as the industry standard. Customers choose the Cadillac® CDIS remote display because of proven: Accuracy, dependability, consistency, low maintenance, reliability, and rangeability.
QUICK CONTACT
DOWNLOADABLE DOCUMENTS
Product Summary
CDIS Energy flow station for Saturated Steam flow energy measurement.
APPLICATIONS AND FEATURES
Cadillac® CDIS BTU Energy Meter – Applications
The Cadillac® CDIS BTU / Energy Meter is the meter of choice for energy applications. This meter can be applied effectively for the following purposes:
- Energy consumption data source for energy management system, DCS, district-wide systems.
- Energy-Customer Billing from accurately totalized Energy / MASS measurements.
- Basis for internal cost distribution using campus-wide systems.
- Efficiency measuring and monitoring from central control rooms.
- Direct Energy / MASS measurements at both Boiler and “point of use” locations.
Cadillac® CDIS BTU Energy Meter – Features
The Cadillac® CDIS BTU / Energy Meter is the meter of choice for energy applications. This meter contains the following features:
- Display Options: Rate, Total, and accumulated Total
- Fully Programmable: K-Factor, Decimal point positions, filter constants and time base are all user programmable.
- Non-Linearity Correction: Available with 10 point linearization allows for input correction to non-linear K-factors or frequency inputs.
- Solid State Relay Outputs: Where two separate registers totalize positive and negative totals.
OPERATION PRINCIPLES
Cadillac® CDIS BTU Energy Meter – Operation Principles
The principle of operation for the Cadillac® CDIS BTU Energy meter is outlined in the diagram.
The CDIS remote BTU energy display takes the signal from the flow device then provides the calculations required to convert and provide customizable energy display and output measurement with user defined units and scaling.
Inputs: Pulse from flow meter (CMAG, EMAG, CV, CU)
Outputs: (2) Pulse (Open Collector) or (1) 4-20 mADC
Display: Provides instantaneous rate, Resettable Total, Accumulated Total
INSTALLATION
Cadillac® CDIS BTU Energy Meter – Installation
The Cadillac® CDIS BTU / Energy Meter installation instructions are outline in the diagram below.
Related Articles
Piping Requirements For Flow Meter Installation
A distorted fluid velocity profile is one of the most common reasons for inaccurate flow meter readings. Swirls or other distortions in the flow are caused by the tees, elbows and valves that make piping systems functional. But, to keep your flow meter functional as...
Metering A Heating System: Condensate Vs. Steam Measurement
To calculate energy usage and loads for a heating system, the question is: Which side of the heating system should we measure to provide the most accurate and encompassing measurement results? The simple answer would be the steam side since this is the heating medium...
GET A FREE QUOTE FOR YOUR NEEDS
World-class brands rely on us for their energy measurement systems
FEATURED ARTICLE
Not All Flow Meters Are Created Equal!
As energy usage has become a lightning rod for conversation and studies regarding efficiency, the ability to measure and quantify energy consumption has become forefront in the battle to get a handle on what is being used and how efficient or inefficient that use may...
© All Rights Reserved