Cadillac® CDIS BTU Energy Meter

Products Menu

Application | BTU Energy Systems

Products | BTU Energy Systems

The choice for accurate energy measurement

The Cadillac® CDIS Remote display, also known as a BTU Energy meter, is designed to provide a local, wall or panel mounted display, for the Cadillac® CV-P, CV-HS, CV-U Vortex MASS flow meters in a saturated steam or fixed pressure gas flow application. The BTU meter display shares the same electronics platform and configuration architecture as the HEATX Energy / BTU Meter, providing the end user the same look and feel for either device. This BTU meter display is a rate and totalizing device, which is capable of calculating and displaying Volume, MASS, and Energy. Combined with Cadillac’s superior flow meter technologies the CDIS provides the most accurate, repeatable, and maintenance free energy system available in the industry.

The CDIS BTU Energy meter remote display with receive the compensated or MASS Pulse output from one the Cadillac® CV Vortex style meters, and will display, and retransmit (if desired) the Energy, consumed.

The New Industry Standard

Combined with Cadillac®’s superior flow meter technologies the CDIS BTU Energy Meter has quickly become acknowledged as the industry standard. Customers choose the Cadillac® CDIS remote display because of proven: Accuracy, dependability, consistency, low maintenance, reliability, and rangeability.

QUICK CONTACT

DOWNLOADABLE DOCUMENTS

Product Summary

CDIS Energy flow station for Saturated Steam flow energy measurement.

APPLICATIONS AND FEATURES

Cadillac® CDIS BTU Energy Meter – Applications

The Cadillac® CDIS BTU / Energy Meter is the meter of choice for energy applications. This meter can be applied effectively for the following purposes:

Energy consumption data source for energy management system, DCS, district-wide systems.
Energy-Customer Billing from accurately totalized Energy / MASS measurements.
Basis for internal cost distribution using campus-wide systems.
Efficiency measuring and monitoring from central control rooms.
Direct Energy / MASS measurements at both Boiler and “point of use” locations.

Cadillac® CDIS BTU Energy Meter – Features

The Cadillac® CDIS BTU / Energy Meter is the meter of choice for energy applications. This meter contains the following features:

Display Options: Rate, Total, and accumulated Total
Fully Programmable: K-Factor, Decimal point positions, filter constants and time base are all user programmable.
Non-Linearity Correction: Available with 10 point linearization allows for input correction to non-linear K-factors or frequency inputs.
Solid State Relay Outputs: Where two separate registers totalize positive and negative totals.

OPERATION PRINCIPLES

Cadillac® CDIS BTU Energy Meter – Operation Principles

The principle of operation for the Cadillac® CDIS BTU Energy meter is outlined in the diagram.

The CDIS remote BTU energy display takes the signal from the flow device then provides the calculations required to convert and provide customizable energy display and output measurement with user defined units and scaling.

Inputs: Pulse from flow meter (CMAG, EMAG, CV, CU)
Outputs: (2) Pulse (Open Collector) or (1) 4-20 mADC
Display: Provides instantaneous rate, Resettable Total, Accumulated Total

INSTALLATION

Cadillac® CDIS BTU Energy Meter – Installation

The Cadillac® CDIS BTU / Energy Meter installation instructions are outline in the diagram below.

Flow Meter Calibration Is A Thing Of The Past With The New Industry Standard

by Cadillac Meter | Jan 14, 2024 | Condensate Meter, Energy/BTU Measurement, Magnetic Meter

Calibrating a flow meter can be a hassle and a headache, but there is a new industry standard in measuring liquid flow that will change your tune. Every so often flow meters need to be calibrated, meaning their performance must be compared to a standard, and the...

Types Of Volumetric Flow Meters

by Cadillac Meter | Jan 14, 2024 | Magnetic Meter, News and Events, Vortex Meter

Flow meters measure the amount of liquid, gas or vapor passing through a piping system. Most flow meters are designed to measure the velocity, or speed at which the fluid flows through a pipe. They use that information along with the pipe’s inner cross sectional area...